China Chamfering Machine Sourcing for OEM/ODM Wholesale Buyers | Yantai Haige Machine Tools Co., Ltd.

China Chamfering Machine Sourcing for OEM/ODM Wholesale Buyers

For OEM project planning, a chamfering machine page should help you move from a broad search to a usable supplier inquiry. This page supports evaluation of China Cheap OEM Wholesale Buy Best Famous Discount CE Certification High-Quality ODM Chamfering Machine Manufacturer, Factory, Suppliers, Exporter, Company, Pro with a focus on application matching.

Procurement managers can use the product information, comparison points, and inquiry guidance to check customization scope, sample approval needs, packaging requirements, and quotation details before building a shortlist.

Hot Selling Product

Chamfering Machine

Chamfering Machine

Double-bar dual-end Chamfering&facing and double-end chip removal device and conveying rack are all installed on the same body. The bar material is loaded to the left end facing device or the right end facing device through the dialing device on the roller table alternately. Two bars roll and slide into the double-station positioning V-groove. There are pulleys under the inner side of the V-groove. The cylinder pushes the bar on the pulley to the positioning block. The press cylinder on the double-facing device head drives the double V-shape holder to clamp the bar. Driven by the oil cylinder,the facing tool process the end surface.The left and right double facing devices process alternately. The jacking cylinder mechanism lifts the bar and convey the bar for the next double chamfering process (double pre-positioned V groove). The bar material was lifted and  slides down from the double pre-position slot to (the right ,the double-end chamfering v-groove), and the bar is pushed by the cylinder again to the right side of the double chamfering head. There is a positioning block in front of the head (pneumatic lifting block), the bar stops where the block positions, the block is lifted, and the pressure cylinder on the double chamfering head drives the double V-shaped clamp to clamp the right end of the bar and the double chamfering head begins the chamfering process. The bar material slides from the double chamfering V-groove on the right end and slides into the double chamfering V-groove on the left end, and pushes the bar on the pulley to the left double-chamfering head by the cylinder again. The left and right double-head chamfering is also processing alternately and repeatedly. The right machine head is fixed, the left head and the conveying rack are driven by hydraulic cylinders, which can be adjusted according to different bar materials, and the length of the bar to be processed can be adjusted on the operating table. Milled and chamfered products have no burrs and are smooth and flat. The milling depth of the end face can be adjusted from 3 to 5mm, and the chamfer size is 2 ~ 3 × 45 ° mm. The depth of the milling surface and the chamfer can be adjusted according to the actual situation of the incoming material. It is required that no new bending deformation should be caused to the bar during the processing.

Read More
ZLCZ Series Debris Removers (for machine tools)

ZLCZ Series Debris Removers (for machine tools)

ZLCZ series slag remover is mainly applicable to the cleaning of metal and non-metal debris, sludge, etc. in the water tank of the machine tool. The main components of the machine include inlet and outlet pipe parts, filter barrel parts, water pump parts and box parts. The mixture of cutting fluid and metal debris is sucked into the filter barrel through the water inlet of the water pump, and the cutting fluid filtered by the filter screen is sent back to the cutting fluid pool, and the purpose of removing debris and debris is achieved by circulating filtration. This machine is plug free, the quick connector is plug and play, the machine tool is free of shut down, and can be cleaned at any time.

Read More
ZLTY Series Chip De-oiling Machines

ZLTY Series Chip De-oiling Machines

ZLTY series chip dryer is mainly used for separating the oil -chips from machine tools(like gear-cutting machines and gun-drills) using expensive coolant (cutting oil) as coolant. Oil-chips drop into the rotary drum of the dryer through a conveying device, and metal filings with coolant (cutting oil) are dried by the action of high-speed centrifugal force, so as to separate oil from the chips. It has a separating load of 100–1000 kg/h, with a drying rate ≥95%. The recycled liquid can be reused, thus making it economical and environmentally friendly.

Read More
ZLTF Series Lifting and Tipping Machines

ZLTF Series Lifting and Tipping Machines

ZLTF series lifting and tipping machines are mainly used for the transfer and tipping of solid materials. When working, the chip collecting truck is lifted toa certain height, and the material is automatically inverted. The equipment is equipped with a limit interlock protection device and a protective device. When in use, it is driven by double chains, and the operation is stable and reliable.

Read More
High-pressure central water supply cooling system (for machine tools)

High-pressure central water supply cooling system (for machine tools)

The high-pressure central water cooling system adopts the two-stage filtration form of vortex separator + cloth bag filter. Vortex separators can effectively filter heavy foreign bodies such as cutting, and cloth bag filters can effectively filter light foreign bodies such as floating objects, ensuring that high precision coolant is provided to machine tools. The high pressure center outlet water system is compact in appearance, not limited by the installation site, convenient in maintenance and management, and especially suitable for high precision, high performance, high speed CNC machine tool cutting fluid supply.  This product is suitable for water soluble cutting fluid and other low viscosity fluids. System supply pressure 2–15 MPa can be designed and produced.

Read More
LG90-H Single line long stroke cold tube milling machine

LG90-H Single line long stroke cold tube milling machine

The main structure of LG cold tube rolling mill is composed of machine bed, rotary feeding mechanism, frame, a main motor, core rod, transmission system, electrical system, etc. With the development of technology, nowadays the rotary feeding mechanism has been evolved into single rotation, double feeding, double rotation, single feeding in,and double rotation double feeding in. And the usual feeding mode can be divided into mechanical feeding, photoelectric feeding, and servo feeding. The most critical part of one cold rolling mill is the frame, which includes roller, gear, rack, etc.. The working principle can be described as follows. By creating regular cavity by roller and mandrel, steel tube can be rolling milled taking advantage of elastic deformation of metal. The cold tube rolling mill machine can achieve cold rolling process to the shell using ring hole with relatively good first time rolling performance, and can process nonferrous metal seamless pipe of normal precision as well. The most obvious characteristic of cold mill is the high material utilization, with better precision and surface roughness than cold tube drawing machine.

Read More

How To Compare Chamfering Machine Options

Product Guide

The related product list helps you compare China Cheap OEM Wholesale Buy Best Famous Discount CE Certification High-Quality ODM Chamfering Machine Manufacturer, Factory, Suppliers, Exporter, Company, Pro by actual product direction rather than keyword wording alone. Check whether each product supports OEM project planning, then use the table below to prepare a clearer RFQ.

Criterion What To Check Why It Matters Buyer Tip
Application fit Match pipe, plate, or edge use Avoids wrong chamfer type Send drawings in RFQ
Customization scope Confirm OEM/ODM options Supports project-specific setup List voltage, angle, size
Sample approval Request sample or trial video Reduces bulk order risk Define pass criteria
Lead time Ask sample and batch schedule Protects OEM planning Link dates to PO
Export packing Confirm crate, marks, documents Helps shipment review Share destination rules

How To Choose Chamfering Machine Supplier

If you are searching for China Cheap OEM Wholesale Buy Best Famous Discount CE Certification High-Quality ODM Chamfering Machine Manufacturer, Factory, Suppliers, Exporter, Company, Pro, the key is to match the chamfering machine to your part material, edge requirement, production workflow, and OEM order plan.

Before requesting a price, prepare drawings, sample photos, target specifications, quantity range, destination, packaging needs, and approval steps. Clear information helps the supplier confirm feasibility, recommend suitable models, and respond with a more useful quotation.

Start with the application. Define the workpiece type, material, edge angle, processing size, production volume, and whether the machine will be used for standard production or a customized OEM project. This helps avoid comparing machines that look similar but serve different operating needs.

Next, check the customization scope. Ask whether adjustments can be made for tooling, fixtures, motor configuration, control options, branding, voltage, manuals, and packaging. If your company requires sample approval, confirm the sample process, evaluation criteria, and estimated lead time before placing a bulk order.

For quotation preparation, include quantity, destination port or delivery address, required documents, packaging standard, and any inspection requirements. If CE certification or other compliance documents are important for your market, request confirmation during the RFQ stage rather than after pricing is received.

When comparing suppliers, look beyond the lowest discount price. Review how clearly each company answers technical questions, whether the recommended model fits your application, and how well they support shortlist building for OEM planning, export packing, and repeat order consistency.

Criteria Importance Description Example Options
Customization scope High Defines OEM fit Fixture, angle, voltage
Sample approval High Confirms application result Trial part review
Quotation inputs High Improves RFQ accuracy Material and size
Packaging needs Medium Supports export handling Crate and labels
Related comparison Medium Builds shortlist Chamfering vs deburring

Top Product Matches

Recommended Products

Top product matches should be reviewed by fit, specification clarity, customization readiness, and how well they support application matching. Use these factors to shortlist practical options before contacting the supplier.

Top Selling Product Selection Factors

Application matching Key for shortlist
OEM detail clarity Needed before quote
Sample confirmation Checks real fit
Packaging readiness Supports export order
Price comparison Compare with specs

Blog Articles / Reviews

How to Choose a Bar Peeling Machine for Round Bar Surface Defect Removal

How to Choose a Bar Peeling Machine for Round Bar Surface Defect Removal

For round bar producers, steel mills and machining material suppliers, a bar peeling machine is usually purchased to solve a very specific production problem: the incoming bar surface cannot meet the next process requirement. Hot-rolled bars may carry oxide scale. Forged or rolled bars may have shallow cracks, decarburized layers, rust or uneven outer surfaces. […]

These buyer-style notes reflect common sourcing situations such as checking product specifications, comparing supplier options, preparing an RFQ, and reviewing export order needs.

Jordan M. Blake August 21, 2026
I used the Chamfering Machine page to clarify bevel size, workpiece material, and setup questions before sending our maintenance team's sourcing inquiry.
Priya N. Desai August 14, 2026
I needed a practical way to compare Chamfering Machine options, and this page helped me separate portable use, bench setup, and batch workflow needs.
Marcus E. Flynn August 6, 2026
I referenced the Chamfering Machine content while drafting an RFQ, especially to avoid vague wording around edge finish, angle adjustment, and operator handling.
Elena V. Brooks July 29, 2026
I found the Chamfering Machine tag useful because it reminded me to ask about compatible parts, burr removal expectations, and repeatability in daily use.

Frequently Asked Questions

For an OEM project, what chamfering machine technical details should I send Yantai Haige before requesting a quotation?

Share workpiece material, diameter or edge range, chamfer angle, required finish, cycle expectations, voltage, automation preference, and any fixture drawings. These details help match a China OEM ODM chamfering machine option to the application.

How should a procurement manager handle sample approval for a customized chamfering machine order?

Define the sample workpiece, inspection method, acceptance tolerance, and documentation format before trial. If customization is involved, confirm tooling, fixture layout, and adjustment range so approval reflects real production requirements.

What lead-time questions are useful when shortlisting a China chamfering machine manufacturer, factory, supplier, or exporter?

Ask which stages affect timing, including technical review, drawing confirmation, component preparation, assembly, testing, packing, and export documents. Avoid relying only on a general delivery statement during OEM project planning.

What packaging requirements should be clarified for wholesale or export chamfering machine orders?

Confirm machine fixing method, moisture protection, crate type, labeling, accessory packing, manuals, and spare parts separation. Packaging should match transport mode, destination handling conditions, and the buyer’s receiving procedures.

How can I compare a chamfering machine with related edge-processing equipment for product shortlist building?

Compare the chamfering range, workpiece shape, edge quality, adjustment method, operator workflow, and maintenance points. A dedicated chamfering machine may suit repeat edges, while other equipment may suit broader processing tasks.

Can CE certification wording be included in an RFQ for a high-quality ODM chamfering machine?

Yes, but state the required compliance documents clearly and ask the supplier to confirm what can be provided for the selected configuration. Do not assume certification coverage before the exact model and customization are reviewed.

Leave Your Message

Send your chamfering machine requirements, including application details, quantity, customization needs, sample approval plan, packaging request, and delivery destination, so the supplier can provide a more accurate response.