WXC80S

The CNC type is PLC multi point controlled to realize the automatic cutting tool adjusting without shutting down the machine, that is say, on power motorized tool adjusting. According to the tiny diameter changes of processed material, the closed loop on power automatic control of material diameter can be realized which will greatly improve the processing accuracy and efficiency. CNC structure is the combination of mechanical, electrical and hydraulic, with the advantage of high automation, high efficiency and easy operation.

Technical Parameters

model		WXC80S
material requirement	diameter range (mm)	21＜dia＜83
	material length (mm)	≥2200
	yield strength(Mpa)	≤1100
	surface hardness	≤HB320
	straightness (mm/m)	≤1.5
	diameter tolerance	according to GB 702-2004 second group
	roundness(mm)	≤50% of diameter tolerance
	surface roughness(Ra)	≤25～50μm
finished product	diameter range(mm)	20≤dia≤80
	diameter cutting depth(mm)	0.5~3
	diameter tolerance	≤h9
	surface roughness (Ra)	≤3.2μm
feeding speed (m/min)		1~12
cutting head rotation rate per minute(rpm)		430~1500
main motor(kw）		75/90
total capacity（kw）		95/110
compressed air (prepared by user)		0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine

WXC80S

WXC80S

Technical Parameters

Related Products

Support