WXC700S

WXC Series Centerless Lathe(commonly known as peeling machine)is a new generation high-efficiency lathe machine which is specialized in processing of metal bar surface such as slender shaft. It can not only quickly remove defects on the surface of round steel such as decarburization layer and cracks, but also realize relatively high precision and roughness. It is especially suitable for processing of super long round steel bar, with working efficiency several times of the traditional processing technology.

Technical Parameters

model		WXC700S
material requirement	diameter range (mm)	410＜dia＜710
	material length (mm)	≥5500
	yield strength(Mpa)	≤1100
	surface hardness	≤HB320
	straightness (mm/m)	≤1.5
	diameter tolerance	according to GB 702-2004 second group
	roundness(mm)	≤50% of diameter tolerance
	surface roughness(Ra)	≤25～50μm
finished product	diameter range(mm)	405≤dia≤700
	diameter cutting depth(mm)	2.0~10.0
	diameter tolerance	≤h9
	surface roughness (Ra)	≤3.2μm
feeding speed (m/min)		0.05~1.2
cutting head rotation rate per minute(rpm)		14~160
main motor(kw）		450kw/500kw
total capacity（kw）		555kw/605kw
compressed air (prepared by user)		0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine

WXC700S

WXC700S

Technical Parameters

Related Products

Support