WXC130S

The CNC type is PLC multi point controlled to realize the automatic cutting tool adjusting without shutting down the machine, that is say, on power motorized tool adjusting. According to the tiny diameter changes of processed material, the closed loop on power automatic control of material diameter can be realized which will greatly improve the processing accuracy and efficiency. CNC structure is the combination of mechanical, electrical and hydraulic, with the advantage of high automation, high efficiency and easy operation.

Technical Parameters

model		WXC130S
material requirement	diameter range (mm)	35＜dia＜135
	material length (mm)	≥2800
	yield strength(Mpa)	≤1100
	surface hardness	≤HB320
	straightness (mm/m)	≤1.5
	diameter tolerance	according to GB 702-2004 second group
	roundness(mm)	≤50% of diameter tolerance
	surface roughness(Ra)	≤25～50μm
finished product	diameter range(mm)	35≤dia≤130
	diameter cutting depth(mm)	1.0~5.0
	diameter tolerance	≤h9
	surface roughness (Ra)	≤3.2μm
feeding speed (m/min)		0.3~6
cutting head rotation rate per minute(rpm)		240~670
main motor(kw）		110
total capacity（kw）		140
compressed air (prepared by user)		0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine

WXC130S

WXC130S

Technical Parameters

Related Products

Support