WXC80S

Nau'in CNC shine PLC Multi point sarrafawa don gane kayan aikin yankan atomatik na daidaitawa ba tare da rufe na'urar ba, wato, akan daidaitawar kayan aiki mai amfani da wutar lantarki. Dangane da ƙananan canje-canjen diamita na kayan sarrafawa, rufaffiyar madauki akan ikon sarrafa diamita na abu za'a iya gane shi wanda zai inganta daidaiton aiki da inganci sosai. Tsarin CNC shine haɗuwa da inji, lantarki da na'ura mai aiki da karfin ruwa, tare da amfani da babban aiki na atomatik, babban inganci da sauƙin aiki.

Ma'aunin Fasaha

abin koyi		WXC80S
buƙatun abu	kewayon diamita (mm)	21＜diya＜83
	tsayin abu (mm)	≥2200
	samar da ƙarfi(Mpa)	≤1100
	taurin saman	Saukewa: HB320
	madaidaiciya (mm/m)	≤1.5
	diamita haƙuri	bisa ga GB 702-2004 rukuni na biyu
	zagaye(mm)	≤50% na haƙurin diamita
	rashin tausayi(Ra)	≤25～50 μm
gama samfurin	kewayon diamita (mm)	20≤dia≤80
	zurfin yankan diamita(mm)	0.5 ~ 3
	diamita haƙuri	≤9 ku
	rashin tausayi (Ra)	≤3.2μm
gudun ciyarwa (m/min)		1 ~ 12
yankan adadin jujjuya kai a minti daya(rpm)		430-1500
babban motar(kw）		75/90
jimlar iya aiki (kw）		95/110
matse iska (mai amfani ya shirya)		0.5 ~ 0.8MPa, 1.8m3 / min, 0.8 m3 sama tanki iska da biyu mataki mai ruwa SEPARATOR da kuma injin daskarewa nau'in bushewa da aka matsa

WXC80S

WXC80S

Ma'aunin Fasaha

Samfura masu dangantaka

Taimako