WXC100S CNC Bar Peeling Machine
WXC100S CNC Bar Peeling Machine
WXC100S na'ura ce ta kwasfa maras tushe ta CNC don madaidaicin injin diamita na waje na sanduna zagaye na karfe da dogayen ramuka. Yana kawar da tsagewar saman, decarburization, baƙar fata, sikelin oxide da sauran lahani kafin niƙa, zane ko ƙare ayyukan.
Tsarin kulawa na CNC yana inganta daidaiton ciyarwa, daidaitawar kayan aiki da maimaitawar samarwa. Ya dace da ƙarfe mai haske, ƙarfe mai ƙarfe, ƙarfe mai ɗaukar nauyi, ƙarfe na bazara, bakin karfe, gami da titanium, gami da jan ƙarfe da sarrafa mashaya aluminium.
Idan aka kwatanta da juyi na al'ada ko peeling na hannu, WXC100S yana ba da mafi girma yawan aiki, mafi kyawun daidaiton saman da ƙananan dogaron aiki. Ana ba da shawarar ga madaidaicin madaidaicin ƙarar ƙira da samar da kayan ƙarfe na ƙarfe na fitarwa.
Aikace-aikace na yau da kullun sun haɗa da shirye-shiryen hannun jari don sassan mota, kayan aikin injuna, samarwa mai ɗaukar nauyi, kayan ƙugiya da masana'anta mai haske.
Ma'aunin Fasaha
| Samfura | WXC100S | |
| Abubuwan Bukatun Aiki | Tsayin Diamita (mm) | 26 | diyya 102 |
| Tsawon Aikin Aiki (mm) | ≥2800 | |
| Ƙarfin Tensile (MPa) | ≤1100 | |
| Taurin Sama | ≤HB320 | |
| Madaidaici (mm/m) | ≤1.5 | |
| Haƙuri na Diamita | bisa ga GB 702-2004 rukuni na biyu | |
| Zagaye (mm) | ≤50% na haƙurin diamita | |
| Tashin Lafiya (Ra) | ≤25 ~ 50 μm | |
| Kammala Samfur | Tsayin Diamita (mm) | 25≤dia≤100 |
| Adadin Yanke Diamita (mm) | 1.0 ~ 4.0 | |
| Haƙuri na Diamita | ≤9 ku | |
| Rawanin Surface (Ra) | ≤3.2μm | |
| Gudun tafiya (m/min) | 0.5-10 | |
| Gudun Cutterhead (rpm) | 430-1200 | |
| Babban Motoci (kw) | 90 | |
| Jimlar Ƙarfin (kw) | 120 | |
| Tushen Jirgin Sama (mai amfani ya samar) | 0.5-0.8 MPa, 1.8m³/min, tankin iska sama da 0.8m³, tare da mai raba ruwa mai hawa biyu da na'urar busar da iska mai sanyi | |
