Injin goge bakin belt

The abrasive bel polishing inji an tsara don surface nika, deburring, descaling da polishing na sanduna, tubes, shafts da profile kayan. Yana amfani da bel mai ɗamara don cire lahani na saman da inganta haske da santsi.
Kayan aiki sun dace da bakin karfe, carbon karfe, gami da karfe, aluminum gami, jan karfe da sauran kayan karfe. Ana amfani da shi sosai kafin ko bayan zane, kwasfa, daidaitawa da sarrafa injina.
Ana iya saita injin tare da kawunan gogewa da yawa, ciyarwa ta atomatik, tarin ƙura da sarrafa matsa lamba bisa ga diamita na samfur da buƙatun ƙare saman.
Abũbuwan amfãni sun hada da high polishing yadda ya dace, barga surface ingancin, sauki bel sauyawa, ƙananan aiki tsanani da kuma inganta bayyanar ƙãre karfe kayayyakin.

Ma'aunin Fasaha

Samfuran Injin goge Belt mai ƙyalli da Babban Ma'aunin Fasaha
Samfura	YM20	YM50	YM80	YM130	YM150	YM150SA	YM250SA	YM350SA	MSA50	MS80
Tsawon Diamita	Φ6 ~ 20mm	Φ12 ~ 55mm	Φ16 ~ 80mm	Φ60 ~ 130mm	Φ60 ~ 150mm	Φ50 ~ 165mm	Φ95 ~ Φ250mm	Φ80 ~ 350mm	Φ35 ~ 70mm	Φ18 ~ 80mm
Tsawon Aikin Aiki	≥2m	≥1m	≥1.5m	≥2m	≥2m	≥2m	≥2m	≥2m	≥1.5m	≥1m
Gudu	2 ~ 12m/min	1 ~ 15m/min	0.5 ~ 12m/min	0.1 ~ 10m/min	0 ~ 8m/min	0.75 ~ 1.5m/min	0.75 ~ 1.5m/min	0.1.2m/min	5 ~ 30m/min	4 ~ 40m/min
Tashin hankali	Ra ≦1.6µm	Ra ≦1.6µm	Ra ≦1.6µm	Ra ≦1.6µm	Ra ≦1.6µm	Ra ≦1.6µm	Ra ≦1.6µm	Ra ≦1.6µm	Ra ≦1.6µm	Ra ≦1.6µm
Motar ciyarwa	0.55kw × 2	———	———	———	———	0.55kw × 2	0.55kw × 2	0.55kw × 2	0.37kw	0.75kw
Babban Motar	———	3 kw	3 kw	4 kw	4 kw	———	———	———	3 kw	7,5kw
Motar Abrasive Belt	———	2.2kw×2	2.2kw×2	3 kw	3 kw	———	———	———	———	———

Injin goge bakin belt

Injin goge bakin belt

Ma'aunin Fasaha

Samfura masu dangantaka

Taimako